BMW 3 series E30

Since 1983-1994 of release

Repair and car operation



BMW E30
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
- 11. A running gear
   11.1.10. Back springs
   11.1.11. A bar of the back stabilizer of cross-section stability
   11.1.12. Levers of a back suspension bracket
   11.1.13. Bearings of back wheels
   11.1.14. Corners of installation of wheels
   11.1.2. Specifications
   11.1.3. The stabilizer of cross-section stability of a forward suspension bracket
   11.1.4. The suspension bracket lever
   11.1.5. A rack of a forward suspension bracket
   11.1.6. Springs or the shock-absorber of a rack of a suspension bracket
   11.1.7. Spherical support
   11.1.8. A nave of a forward wheel and the bearing
   11.1.9. Back shock-absorbers
   + 11.2. A steering
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice



11.1.7. Spherical support
THE GENERAL DATA

The prevention

On each lever of a suspension bracket it is provided on 2 support.


Check and replacement

PERFORMANCE ORDER
1. Lift the car.
2. Check up a condition of covers of support. At detection on covers of anguishes, cuts or leaks of greasing the lever in gathering with support replace. Support separately in spare parts are not delivered.
3. Check up deterioration of spherical support, having shaken the lever the mount inserted between the lever and a cross-beam (or a rotary fist). At detection люфта the lever is subject to replacement.
4. If at wheel rocking in a vertical plane it is felt appreciable люфт in a place of a nut of a finger of a support the reason is deterioration of a finger or aperture expansion under a finger in the lever or in a rotary fist. In this case it is necessary to replace both the lever with support, and a cross-beam or a rotary fist.