BMW 3 series E30

Since 1983-1994 of release

Repair and car operation



BMW E30
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. A running gear
- 12. A body
   12.2. Vinyl furnish
   12.3. Repair of insignificant damages of a body
   12.4. Repair of considerable damages of a body
   12.5. Loops and locks
   12.6. A windscreen and motionless glasses
   12.7. A forward lattice
   12.8. A cowl
   12.9. Bumpers
   12.10. The internal panel of a door
   12.11. A door
   12.12. A cover of a luggage carrier / a cover of a back compartment
   12.13. The door lock, the drum-type switch of the lock and door handles
   12.14. Door glass
   12.15. Стеклоподъемник
   12.16. An external mirror
   12.17. A casing of a steering column
   12.18. Seats
   12.19. Check of seat belts
+ 13. An electric equipment
+ 14. A good advice
Аренда кабриолетов в Черногории тут.



12.12. A cover of a luggage carrier / a cover of a back compartment

Luggage carrier cover

PERFORMANCE ORDER
1. Open a cover and disconnect all sockets of wires on a cover.
2. Outline contours of loops and turn away bolts of fastening of loops to a cover, uncover with the assistant.
3. Installation is carried out upside-down. At assemblage combine the labels put at dismantling. Adjust a cover, moving it in apertures under bolts of loops at the released bolts (arrow). Adjustment on height is provided with moving of a clamp and the cover lock.

Cover of a back compartment

PERFORMANCE ORDER
1. Disconnect the battery from weight.
2. Disconnect wires and a tube стеклоомывателя. Turn away screws and disconnect racks on both parties of a cover. On a part of cars for removal of a rack from the spherical hinge it is necessary to get шплинт or a lock ring.
3. Outline contours of loops, turn away bolts of fastening of loops then with the assistant remove a back cover
4. Installation of a cover and racks is carried out upside-down. At assemblage combine labels. The cover should be symmetrically concerning back lateral racks of a body.