BMW 3 series E30

Since 1983-1994 of release

Repair and car operation

BMW E30
+ 1. The maintenance instruction
+ 2. Maintenance service
- 3. The engine
   + 3.1.2. Specifications
   + 3.2. Dismantle and engine major repairs
   - 3.3. An engine electric equipment
      3.3.2. Specifications
      3.3.3. The battery - engine start-up in emergency situations
      3.3.4. Removal and battery installation
      3.3.5. Power cables
      - 3.3.6. Ignition system
         3.3.6.2. Check of system of ignition
         3.3.6.3. Check and installation of the moment of ignition (only for system TCI)
         3.3.6.4. The ignition distributor
         3.3.6.5. The ignition coil
         3.3.6.6. The shaper of impulses and the block of electronic ignition
         3.3.6.7. A backlash in the gauge of the shaper (system TCI)
         3.3.6.8. Gauges of system of ignition
      + 3.3.7. System of a charge of the battery
      + 3.3.8. System of start-up of the engine
      3.3.9. Malfunctions of the generator
      3.3.10. The basic malfunctions of an electric equipment
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. A running gear
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

3.3.6.7. A backlash in the gauge of the shaper (system TCI)

PERFORMANCE ORDER

1. Disconnect the battery from weight.

2. Brass щупом measure a backlash between a rotor and a shaper plate. Щуп should pass under small effort.

3. If the backlash differs from standard remove the shaper, release fastening screws to a plate and establish a backlash.

4. Establish the shaper and check up a backlash.