BMW 3 series E30

Since 1983-1994 of release

Repair and car operation



BMW E30
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Cooling system
+ 5. Heating and ventilation
- 6. Fuel system
   6.2. Specifications
   6.3. Check of system of injection
   6.4. A measuring instrument of a stream of air
   6.5. A throttle branch pipe
   6.6. A regulator of pressure of fuel
   6.7. An atomizer of start-up of the cold engine and a thermotimer
   6.8. Check and replacement of atomizers
   6.9. The air proof-reader of idling
   6.10. An order декомпрессии fuel system
   6.11. Check of pressure of fuel
   6.12. The fuel pump, the pump of pumping and the gauge of level of fuel in a tank
   6.13. Gasoline pipe lines and the union
   6.14. A fuel tank
   6.15. The air filter
   6.16. A cable of a drive throttle заслонки
   6.17. The carburettor
+ 7. An exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. A running gear
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice
chocolate slim, modalităţi a o



6.15. The air filter
PERFORMANCE ORDER
1. Disconnect the battery from weight.
Carburettor engines

2. Take away latches, turn away a nut and uncover.
3. Get filtering element and wipe dry an internal surface of the case of the filter.
4. To remove the filter case disconnect an air line (1) and a branch pipe for всасывания warm air (2).
5. Disconnect from the carburettor a vacuum hose.
6. Turn away 4 nuts and get a metal ring.
7. Turn away an arm nut.

8. Remove the filter, having disconnected a ventilation hose картера.

9. Installation is carried out upside-down. At assemblage combine an arrow on a cover with an arrow on a soaking up branch pipe.
Air cleaner инжекторных engines
10. In a forward part of the filter disconnect an air line.
11. Disconnect an air line between a throttle branch pipe and the air filter.
12. Remove an air cleaner.
13. Disconnect from a measuring instrument of a stream a conducting socket.

14. Turn away a nut (arrow) and get an air cleaner.
15. Installation is carried out upside-down. Track tightness of fastening of air lines.