BMW 3 series E30

Since 1983-1994 of release

Repair and car operation

+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmissions
- 9. Coupling
   9.2. Specifications
   9.3. Coupling check
   9.4. The main cylinder of coupling
   9.5. A coupling pedal
   9.6. The blocking switch of coupling
   9.7. The working cylinder of coupling
   9.8. Removal of air from a coupling hydrodrive
   9.9. Coupling details
   9.10. A kardannyj shaft
   9.11. Elastic муфта
   9.12. An average support
   9.13. Kardannye hinges
   9.14. The forward aligning plug
   9.15. The SHRUS карданного a shaft
   9.16. Semiaxes
   9.17. SHRUS and covers
   9.18. Epiploons of a reducer of a back axis
   9.19. A reducer of a back axis
   9.20. An epiploon of a leading gear wheel of a reducer
+ 10. Brake system
+ 11. A running gear
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice

9.15. The SHRUS карданного a shaft

On a part of cars in a forward part карданного a shaft the SHRUS which fastens bolts to a flange of a shaft of transmission is provided.


1. Remove карданный a shaft, remove a collar of a cover of the hinge, get a lock ring and get the SHRUS a stripper.
2. Beat out bolts. Put in the hinge 80 г greasings so that greasing has come into a holder of rollers.
3. Replace a lining and a cover cover.
4. Through apertures in the hinge запрессуйте bolts, clear and grease шлицы карданного a shaft with fixing structure.
5. Dress a cover, establish the hinge, пристукнув through the wooden prorate. Replace a lock ring and a collar. Establish карданный a shaft.