BMW 3 series E30

Since 1983-1994 of release

Repair and car operation



BMW E30
+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
- 11. A running gear
   11.1.10. Back springs
   11.1.11. A bar of the back stabilizer of cross-section stability
   11.1.12. Levers of a back suspension bracket
   11.1.13. Bearings of back wheels
   11.1.14. Corners of installation of wheels
   11.1.2. Specifications
   11.1.3. The stabilizer of cross-section stability of a forward suspension bracket
   11.1.4. The suspension bracket lever
   11.1.5. A rack of a forward suspension bracket
   11.1.6. Springs or the shock-absorber of a rack of a suspension bracket
   11.1.7. Spherical support
   11.1.8. A nave of a forward wheel and the bearing
   11.1.9. Back shock-absorbers
   - 11.2. A steering
      11.2.2. Tips of helmsmen ятг
      11.2.3. Covers of the steering mechanism
      11.2.4. The steering mechanism
      11.2.5. The hydraulic booster pump
      11.2.6. Removal of air from the wheel hydraulic booster
      11.2.7. A steering wheel
+ 12. A body
+ 13. An electric equipment
+ 14. A good advice



11.2.6. Removal of air from the wheel hydraulic booster
PERFORMANCE ORDER
1. Check up liquid level in a tank, if necessary restore.
2. Lift car redock.
3. Turn a wheel in both parties against the stop. Check up and restore liquid level.
4. Start the engine and establish turns about 1000 rpm. Again turn a wheel in both parties against the stop 3–4 times and check up liquid level.
5. Lower the car and on the working engine turn a wheel in both parties against the stop some times and check up liquid level, if necessary restore.