BMW 3 series E30

Since 1983-1994 of release

Repair and car operation

+ 1. The maintenance instruction
+ 2. Maintenance service
+ 3. The engine
+ 4. Cooling system
+ 5. Heating and ventilation
+ 6. Fuel system
+ 7. An exhaust system
+ 8. Transmissions
+ 9. Coupling
+ 10. Brake system
+ 11. A running gear
- 12. A body
   12.2. Vinyl furnish
   12.3. Repair of insignificant damages of a body
   12.4. Repair of considerable damages of a body
   12.5. Loops and locks
   12.6. A windscreen and motionless glasses
   12.7. A forward lattice
   12.8. A cowl
   12.9. Bumpers
   12.10. The internal panel of a door
   12.11. A door
   12.12. A cover of a luggage carrier / a cover of a back compartment
   12.13. The door lock, the drum-type switch of the lock and door handles
   12.14. Door glass
   12.15. Стеклоподъемник
   12.16. An external mirror
   12.17. A casing of a steering column
   12.18. Seats
   12.19. Check of seat belts
+ 13. An electric equipment
+ 14. A good advice

12.11. A door
1. Remove the internal panel of a door. Disconnect sockets and lay in a door skeleton.
2. Outline contours of loops, remove a lock ring (arrow), get an axis and disconnect the terminator отрывания doors. On a part of cars the terminator fastens a pin which should be beaten out.
3. Turn away a nut of loops (arrow) and remove a door.
4. Installation is carried out upside-down.
5. Adjust a door. In directions upwards-downwards and forward-back the door is regulated by moving at the released nuts of fastening of loops to a body.
6. In last turn position of a clamp of the lock by moving is regulated at the released bolts (arrow).